this is all my parts off the ps3 i riped it up to show ye guys what its like inside a ps3 now you no please rate subscribe and comment thanks the problem im having with the ps3 is that im getting a yellow light when i turn it this is usually caused by the gpu or cpu losing contact with the motherboard in my case its the gpu that is not contacting the motherboard how do i no this? i no because i looked down along it and i can see pins but there not touching the gpu the cpu looks fine so far..... how am i gona fix it? im gona buy liquid flux it is a liquid solder this will flow underneath the gpu and i am gona use a heatgun at 420 degrese fareign height so i can melt the solder on the gpu allready and the liquid flux might stick all together with the solder it is basically a solder itself so i am gona heat it up when the liquid solder is in it and do this for about a minute untill it starts bubbling like mad then the cpu in this case i am gona do both of them just in case always do the 2 of them this might not last for a long time but it could last up to a number of months and when it does it again repeat this process it is not hard to take it apart ONLY DO THIS IF IT IS OUT OF WARANTY AND IM NOT RESPONSIBLE FOR ANY DAMAGE YOU MIGHT INFLICT!!!!!!!! thanks for watching please rate subscribe and comment!!!!!=) PS3 heatsink fan PS3 heatsink PS3 motherboard (cell broadband engine cpu, RSX gpu) PS3 touch pad buttons PS3 power supply unit (PSU) PS3 wireless and bluetooth card PS3 ...
Tags: ps3 parts ps3 power supply, ps3 disk drive, ps3 motherboard, ps3 cpu, ps3 gpu, playstation riped up to pieces, my ps3 taken apart, ps3 heatsink looking inside it
No comments:
Post a Comment